11V9 Diamond Cup Wheels

11V9 Diamond Cup Wheels from Braemar USA deliver accurate and steady grinding on CNC tool grinders and automated systems. These resin bond 11V9 diamond wheels cut cleanly and hold their shape during use. As a result, they produce smooth surface finishes and consistent tool geometry.

Because of this stable performance, operators often use these wheels for fluting, gashing, relief grinding, and small-tool shaping. In addition, the wheels work well in both production and regrind applications.

Resin Bond for Cool and Stable Grinding

The resin bond design helps control heat during grinding. While the wheel runs, the bond releases dull diamond grains and exposes new, sharp cutting edges. This process keeps the wheel cutting efficiently throughout its service life.

As a result, operators see:

Lower grinding temperatures

Less burning and edge damage

Cleaner cutting action

More consistent surface finishes

Because heat stays under control, these wheels perform well on carbide, ceramics, quartz, fused silica, glass, and composite materials.

11V9 Cup Shape for Accurate Tool Grinding

The 11V9 cup wheel shape adds support at the grinding zone. This added stiffness reduces wheel flex and improves control during precision grinding. As a result, operators can grind small tools with greater confidence.

Typical applications include:

Flute grinding

Gash and clearance-angle grinding

Relief grinding

Small-tool and micro-tool work

Step drills, end mills, and reamers

Because the wheel holds its form, tight tolerances are easier to maintain. At the same time, sharp edges and fine details remain intact.

Consistent Performance in Production Environments

Braemar USA 11V9 Diamond Cup Wheels are built for daily production use. They grind smoothly and deliver repeatable results over long runs. Even as workloads increase, performance stays predictable.

Key benefits include:

Steady wear with reliable wheel shape

Smooth grinding with low vibration

Strong edge retention

Repeatable results across long cycles

Reduced chipping and improved finishes

In addition, these wheels run well on ANCA, Walter, Rollomatic, Saacke, Schneeberger, EWAG, and other CNC tool-and-cutter grinders.

Suitable for Hard and Brittle Materials

11V9 Diamond Cup Wheels are designed to grind difficult materials accurately. For example, they are commonly used on:

Tungsten carbide

Technical and advanced ceramics

Glass, fused silica, and quartz

PCD and PCBN

Advanced composites

With stable form and good heat control, Braemar USA 11V9 Diamond Cup Wheels meet the accuracy and surface-finish demands of modern CNC tool grinding.

SDDD  Alternative Truing Method

Truing Stick for Diamond & CBN Resin Bond Wheels

“A new simple way”

                more information on our SDDD Truing Stick

.

Call (480) 966-9311 or Add to Quote for pricing.