Wheel Flanges 1A8F
Wheel Flanges are available in different diameters which allows the customer to flange the wheel as it wears. The standard hole size is 1 1/4", but special hole sizes are available upon request. Braemar Wheel Flanges are used with the wheel to add stability. Wheel Flanges are available from 3" to 5 1/2" in increments of 1/2". If there is a need to have a smaller hole, Braemar offers a special Type 1A1 hole reduction flange. This wheel is used for precision slot grinding mainly in thicknesses over .050" where a thickness tolerance of +0/-.0005" is sufficient.
|
